RODI Systems offers two important accessories for the EZ SDI series of automatic SDI monitors. The Booster Pump assembly may be used with either the single-test or four-test EZ SDI units. The Sample Sequencer is used only with the four-test unit.
The Booster Pump assembly allows the EZ SDI products to be used when sufficient sample pressure is not available (the EZ SDI products require 70 psig of sample pressure). The Booster Pump assembly is housed in a non-metallic enclosure and includes an interface cable which allows it to be controlled by the EZ SDI unit.
The Sample Sequencer is used only with the four-test EZ SDI unit and allows each test to be taken from a different sample point in the pretreatment system. The Sample Sequencer is housed in a non-metallic enclosure and includes a booster pump along with an interface cable which allows it to be controlled by the EZ SDI unit.
| Power | 120-240 VAC,50-60 Hz, 0.8 A |
|---|---|
| Enclosure | NEMA 4X enclosure |
| Mounting | Wall Mounting |
| Electrical | All connections via removable screw terminals. |
| Environment | 0 to 50 C (32 to 122 F), 10 to 90% relative humidity, non-condensing |
