The RODI Systems Model WLD 300A is designed to detect leaks of water or other conductive fluids. The WLD 300A is a cost-effective means to monitor for leaks on or near commercial water treatment systems, HVAC units, laundry equipment, or any location where an undetected leak could cause damage. The WLD 300A differs from other leak detectors in that it may be calibrated to local conditions and it is capable of sensing high purity water.
| Discrete Inputs | Leak Detection Sensor |
|---|---|
| Discrete Outputs | Two Relay Outputs (DPDT), 10 Amps at 240 VAC |
| Other Outputs | Audible Alarm, 108 dB |
| User Interface | 4 Keys, Tactile, 4 LEDs |
| Power | 120 VAC, 4.6 VA, 60 Hz via internal transformer. Does not include loads on output relays. |
| Enclosure | NEMA 4X non-metallic enclosure |
| Mounting | Wall Mounting |
| Dimensions | 6.5" high x 6.5" wide x 3.63" deep; (center hole of mounting feet) |
| Electrical | All connections via screw terminals. |
| Environement | 0°C to 50°C (32°F to 122°F), 0 to 95% relative humidity, non-condensing |
